Manufacturer accreditation means a switchgear brand has checked that a panel builder can assemble its systems the way they were designed and tested, and has given that builder access to its verified designs, training and technical support. For a consultant, it links the brand's IEC 61439 test evidence to the boards that actually arrive on site. Al Qudrah Switchgear in Sharjah, UAE is accredited by Schneider Electric, Legrand, Eaton and CHINT, and this article explains what each accreditation means in practice.
Why does accreditation matter under IEC 61439?
IEC 61439 separates the original manufacturer, who designs and verifies a switchboard system, from the assembly manufacturer, who builds boards from it. A panel builder can rely on the original manufacturer's design verification only if it builds exactly to that system's instructions.
Accreditation is how the brand confirms that a panel builder knows those instructions and follows them. Without it, a board built from a brand's enclosure and busbar parts can still look right, but the link to the brand's test evidence is weaker, and the consultant has to take more on trust. With it, the brand has trained the builder's people, audited its workshop or processes, and stands behind its system when the builder uses it correctly.
What a panel builder gets from accreditation
Accreditation gives the panel builder the brand's verified designs, design tools, training and technical support. The client gets boards built to a known, tested system by people trained to build it.
- Access to the brand's design-verified switchboard systems, with their ratings and test reports.
- Design and calculation software for layout, heat dissipation and bills of materials.
- Training on assembly methods, torque values, busbar arrangements and device installation.
- Technical support from the brand on non-standard requests.
- Authorisation letters that consultants and authorities ask for in submittals.
- A reliable route to genuine components from the brand's channel.
Al Qudrah's accreditations
Al Qudrah holds panel builder accreditation from four switchgear manufacturers, and also builds with ABB and LS Electric components. Each accreditation covers that brand's systems.
| Manufacturer | Accreditation | What it covers |
|---|---|---|
| Schneider Electric | Green Partner Panel Builder (UAE) | Schneider LV switchboard systems; staff trained in "How to assemble LV switchboards: best practices" |
| Legrand | Authorized Panel Builder, following an IEC 61439-1 and -2 audit | Legrand XL³ systems; XL PRO³ design and calculation training (2022) |
| Eaton | Registered Panel Builder | Eaton xEnergy switchboard system |
| CHINT | Authorized LV Switchgear Panel Builder (UAE) | CHINT LV switchgear systems |
Our team has also completed ABB training on Ekip T&P for ACB installation, testing and programming (2021), which covers setting up and testing the electronic trip units on ABB air circuit breakers.
Accreditation plus our own type tests
Accreditation and in-house design verification work together. Our DEKRA certificates cover 3200 A, 2500 A and 1600 A MDBs built on Legrand XL³, verified to IEC 61439-2:2020, and our ASTA (Intertek) certificate covers a 2500 A MDB/MCC design.
Those tests confirmed ratings that matter in the Gulf: short-circuit withstand of 65 kA for 3 s with a 143 kA peak, 415 V operational voltage, insulation voltage up to 1000 V, impulse withstand up to 12 kV, verification at 50 °C ambient, IP43 to IP54, forms 2a to 4b and tinned copper busbars. Combined with the Legrand audit to IEC 61439-1 and -2, they give a consultant two independent lines of evidence for the same boards. We explain how to read those certificates in IEC 61439-2 design verification.
How to check a panel builder's accreditation
Ask for the brand's authorisation letter or certificate, check that it is current and names the correct company and country, and confirm that the offered board uses that brand's system.
A few practical checks for consultants and contractors:
- The certificate or letter should name the panel builder's legal entity, which for us is Al Qudrah Switchgear IND L.L.C.
- It should cover the country of the project, or the region.
- The board in the submittal should use the accredited brand's enclosure and busbar system, not just its breakers.
- If in doubt, contact the brand's local office. Manufacturers will confirm whether a panel builder is in their programme.
Accreditation sits alongside the builder's other credentials: ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 certification, utility registration such as our SEWA Grade 1 listing up to 3200 A, and a record of completed projects. All of our certificates are on the certificates page, and our engineering approach is described in Inside a Sharjah switchgear factory.
Frequently asked questions
What does it mean to be an accredited panel builder?
It means a switchgear manufacturer has assessed the panel builder and authorised it to build boards using the manufacturer's switchboard systems. The builder gets access to verified designs, design software, training and technical support. Under IEC 61439, building exactly to the original manufacturer's verified system lets the panel builder rely on that manufacturer's design verification.
Which manufacturers have accredited Al Qudrah?
Al Qudrah is a Schneider Electric Green Partner Panel Builder (UAE), a Legrand Authorized Panel Builder following an IEC 61439-1 and -2 audit, an Eaton Registered Panel Builder for the xEnergy system, and a CHINT Authorized LV Switchgear Panel Builder (UAE). We also build with ABB and LS Electric components.
Is accreditation the same as a type test?
No. A type test, or design verification, proves that a specific switchboard design meets IEC 61439 ratings. Accreditation confirms that a panel builder is approved to build that manufacturer's verified systems correctly. They complement each other: the test proves the design, and accreditation, together with routine tests, gives confidence each board is built to it.
Can an accredited panel builder use components from other brands?
Usually, within limits. Devices from other brands can often be fitted, but the switchboard system's verified ratings apply only to the configurations covered by its design verification. Mixing an enclosure system from one brand with busbars or breakers from another may need its own verification. The consultant should check that the offered combination is covered.

